PET N Paint Pressure Tanks iwata

The PET (ANEST IWATA) pressure tank series is available in three capacities of 10L, 30L and 50L. The MN models are all available with pneumatic agitation, while the N models are available for standard applications and liquid handling without agitation. All PET series are made with electroclean 304 stainless steel wetted parts in accordance with ATEX 94/9 EC regulations.

PET-10N/MN
The tank has a capacity of 10L/min with a maximum working pressure of 7 bar. The tank has two regulators, one for regulating the fluid and the other for regulating the operating pressure of the spray gun. Inside the tank there is a removable and cleanable stainless steel polished liner, which allows the operator to keep the pot cleaner and reduce solvent waste. This model also complies with EEC Directive 94/9 EC ATEX standards.

PET-30N/MN
This model has a capacity of 30 liters with a maximum working pressure of 7 bar. This model also complies with EEC Directive 94/9 EC ATEX standards. The 30 liter tank has two regulators, one for the fluid and one for adjusting the operating pressure of the spray gun. The 30 liter tank is available in two models: pneumatically stirred and non-stirred, standard with a crescent-shaped handle for easy lifting and carrying.

PET-50N/MN
This model has a capacity of 50 liters with a maximum working pressure of 7 bar. This model also complies with EEC Directive 94/9 EC ATEX standards. The 50 liter tank has two regulators, one for the fluid and one for adjusting the operating pressure of the spray gun. The 50 liter tank is available in two models: pneumatically stirred and non-stirred, standard with a crescent-shaped handle for easy lifting and carrying.

Contact ATA